Table of Contents
Advertisement
Setting Name
Rear Seat Alert
ParkSense Front Camera Activation
Clock
When the Clock button is pressed on the touchscreen, the system displays the different options related to the vehicle's internal clock.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Sync Time With GPS
Set Time And Format/Time Format
Set Time Hours
Description
When this setting is turned on and the rear doors are opened while the engine is running,
or if the engine is turned on within 10 minutes of the door opening, a message will
appear to check the rear seat when the vehicle is powered off.
This setting will allow you to enable or disable the front camera when an obstacle is
detected.
Description
This setting will sync the time to the GPS receiver in the system. The system will control
the time via the GPS location.
This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be
off for this setting to be available. The "12 hrs" setting will set the time to a 12-hour
format. The "24 hrs" setting will set the time to a 24-hour format.
This setting will allow you to set the hours. Sync Time With GPS must be off for this
setting to be available. The "+" setting will increase the hours. The "-" setting will
decrease the hours.
MULTIMEDIA
199
5
Advertisement
Table of Contents
