Table of Contents
Advertisement
Web User Interface
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web
authentication page. In this window, user can view and configure the Captive Portal settings. After selecting Passcode as the Authentication
Type, we can configure the Passcode authentication that will be applied to each wireless client in this network.
Session Timeout
Enter the session timeout value (1-1440).
(1-1440)
Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
SSID Index
Click the drop-down menu to select the SSID for
this Authentication.
Authentication Type
By default the function is set to Disable.
For this example, click the drop-down menu to
select Passcode.
Web Redirection State
When Authentication Type is Passcode, click
the drop-down menu to enable web redirection
state.
URL Path
Click the drop-down menu to select http:// or
https://, then enter the URL of the website that
will be used in the space provided.
IPIF Status
Click the drop-down menu to enable or disable
the Captive Portal with its IP interface feature.
VLAN Group
Enter the VLAN Group ID.
Get IP From
Click the drop-down menu to select IP address
setting mode.
y Static IP (Manual): Choose this option if you
do not have a DHCP server in your network,
or if you wish to assign a static IP address to
the DAP-2620.
y Dynamic IP (DHCP): The other fields will be
grayed out. Please allow about 2 minutes for
the DHCP client to be functional once this
selection is made.
D-Link DAP-2620 User Manual
Authentication Settings - Passcode
47
Advertisement
Table of Contents
