Table of Contents
Advertisement
Web User Interface
The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings.
Click Save for the changes to take effect.
VLAN Status
Click the radio button to enable or disable VLAN
status. By default this feature is disabled.
VLAN Mode
Displays the current VLAN mode.
PVID Auto Assign Status
Click the radio button to enable or disable PVID
auto assign status.
For each untagged port, set the PVID of the port
to its assigned VLAN ID. For example, if ports 1,
2, 3, 4, and 5 are untagged members of VLAN 10,
ports 1, 2, 3, 4, and 5 would be configured with
a PVID of 10.
For better system consistency, the following are
recommended:
y set MSSID ports S1 and S2 to 16 and 17,
respectively
y set switch port trunk native VLAN 1 for trunk
port 1
Save
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2620 User Manual
PVID Settings
36
Advertisement
Table of Contents
