7. INITIAL OPERATION
7.1 MAIN DISPLAY
The main display will show the day and time, the
cutting thickness, the trimming thickness, the current
chamber temperature, the target chamber
temperature, the status of the quick-freeze unit
(optional) and the total electronic status of the
instrument and a cutting counter (optional).
7.2 CONTROL PANEL
Software settings and motor operation can be
operated with the control panel on the left to side of
the instrument.
15
TUE 13:05:05
CUT: 7 µm
Cha: -20 °C (-22)
TN60 Control Panel.
Manual_TN60_2021-09-001.00_EN_Tanner.docx
Trim: 19µm
QF: 0
Status:OK
0000