Table of Contents
Advertisement
To change the cutting angle, loosen
the blade holder by turning the right
lever on the blade holder base
counterclockwise.
Tilting the blade holder to the
sample increases the cutting angle,
tilting the blade holder away from
the sample reduces the cutting
angle.
Secure the blade holder clockwise by
turning the right lever on the blade
holder base.
Release the handwheel lock to cut
the samples.
23
Loosening of blade holder fixation and adjusting new
cutting angle (increased cutting angle).
Fixation of blade holder with increased cutting angle.
Manual_TN60_2021-09-001.00_EN_Tanner.docx
Advertisement
Table of Contents
