Table of Contents
Advertisement
Chamber Increase
Retraction
Start defrost
Trim latching
Contrast
Time
Language
Display version
Program settings
Manual_TN60_
2021-09-001.00
For power saving, a higher temperature can be set
for defined times and/or days.
The selected temperature should be below 0 °C to avoid
damage to the microtome by freezing moisture.
0 - 200 µm
Activate
A manual defrost procedure is activated.
ON/OFF
If Trim latching mode is activated, trimming function
is activated and deactivated by pressing
If Trim latching mode is deactivated, trimming
function is activated by continuously pressing
Display contrast
Day and Time
A language can be selected out of a list of available
languages.
Display of software version.
Upon selecting Program settings the automatic
defrost and power saving settings can be changed.
_EN_Tanner.docx
20
once.
.
Advertisement
Table of Contents
