Initial Operation - TANNER Scientific TN50 Operating Instructions Manual

7. INITIAL OPERATION

7.1 MAIN DISPLAY
The main display will show the cutting thickness, the
trimming thickness, the current chamber temperature,
the target chamber temperature, the status of the
quick-freeze unit (optional).
7.2 CONTROL PANEL
Software settings and motor operation can be
operated with the control panel on the left to side of
the instrument.
Operating Instructions – TN50
CUT: 7 µm Trim: 19µm
Cha: -20 °C (-22) QF: 0
TN50 Control Panel.
14