TANNER Scientific Cryostat TN60 Operating Instructions Manual page 22

8.2 INSERTION AND ORIENTATION OF DISPOSABLE BLADE
Activate hand wheel lock.
Remove finger protection.
Loosen the blade fixation by
turning the right lever counter
clockwise.
Use the blade ejector to remove
the blade.
Remove/Insert blade from right
side.
Tighten the blade fixation by
turning the right lever clockwise.
Manual_TN60_
2021-09-001.00
Loosening of blade fixation and insertion of new blade.
Fixation of blade.
_EN_Tanner.docx
22