TANNER Scientific Cryostat TN60 Operating Instructions Manual page 5

3.1 Hand wheel stop
Always use the finger protection
with the knife-/blade holder and put
hand wheel in stop position
• before working with the
knife or specimen
• before changing the
specimen
• during break time
The hand wheel can be stopped in
any position. For this purpose move
the stop lever towards the centre.
To release the stop, please turn the
lever towards the outside again.
5
Hand wheel stop released. Movement.
Hand wheel stop activated. No movement.
Manual_TN60_2021-09-001.00_EN_Tanner.docx