Table of Contents
Advertisement
• The intended use and configurations envisaged for the equipment are the only ones allowed by the
Manufacturer; do not attempt to use the equipment in disagreement with the indications given. Any other
use or configuration must be agreed and written by the Manufacturer, in such a case, will be an enclosure
to the manual.
• For its use the user must also comply with the specific laws in force that exist in the country where the
equipment is installed. Reference is also made in this manual to laws, directives, etc., that the user must
know and consult in order to fulfil the purposes established by the manual.
• If information is exchanged with the Manufacturer or assistance personnel authorized by the former,
please refer to the equipment's rating plate data and serial number.
• The manual must be kept for the equipment's useful life cycle and, if necessary (e.g. damage which
prevents it being consulted even partially) the user must ask the Manufacturer for a new copy, quoting the
publishing code on the cover.
• The manual reflects the state of the art at the moment the equipment was put on the market, of which
it is an integral part. The publication complies with the directives in force at such a date. The manual cannot
be considered inadequate if updates of standards or changes are made to the equipment.
• Any integration to the manual which the Manufacturer deems fitting to send to the users must be kept
with the manual, becoming an integral part of it.
• The Manufacturer is available to its clientele to provide additional information and will take into
consideration any suggestions made to improve this manual to bring it even closer to the requirements for
which it was drawn up.
• If the equipment is sold, which always includes handing over this operating manual, the primary user
must notify the Manufacturer, giving him the address of the new user so the latter can be reached if there
are any communications and/or updates deemed indispensable.
Units that are labelled with a CE mark comply with the Standard: EN 62040-1 and EN 62040-2.
2
Read the manual completely before working on this equipment!
Keep this manual in UPS's front cover's pocket for easy consultation!
Reproduction, adaptation, or translation of this manual is prohibited without prior
written permission of LEGRAND Company, except as allowed under the copyright
laws.
The manufacturer reserves the rights to change the technical specifications and
design without notice.
LEGRAND reserves the rights to change the information in this document
without notice. Refer to hiip://ups.legrand.com/ web site to dowload last
release and translations.
Advertisement
Table of Contents
