Reset Factory Settings - Ledj LEDJ331 User Manual

Artisan 1200 rgbal profile
Table of Contents

Advertisement

Operating instructions
DMX fail setting:
To access the fixtures DMX fail setting, press the "MENU" button to show "DMX FAIL" on the LCD
display. Now use the "UP" and "DOWN" buttons on the rear of the unit to select between "BLACKOUT",
(blacks out the fixture when signal is lost) "HOLD" (holds last DMX command) and
"STATIC" (manual mode). Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
IR setting:
To access the units IR setting, press "MENU" to show "OTHER IR" on the LCD display. Use the "UP" and
"DOWN" buttons to select the between "ON" (IR receiver on) and "OFF" (IR receiver off).
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Backlight setting:
To access the units backlight setting, press "MENU" to show "OTHER IR" on the LCD display. Press the
"ENTER" button to show "BLGT" on the LCD display. Press the "UP" and "DOWN" buttons to select the
between "ON" (backlight on) and "OFF" (backlight goes off after 20 seconds). Press the "ENTER" button
to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Wireless DMX setting:
To access the units Wireless DMX setting, press "MENU" to show "OTHER IR" on the LCD display.
Press the "ENTER" button twice to show "WIFI" on the LCD display. Press the "UP" and "DOWN" buttons
to select the between "ON" and "OFF. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.

Reset factory settings:

To reset the unit back to its factory settings, press "MENU" to show "OTHER IR" on the LCD display.
Press the "ENTER" button three times to show "SYSRESET" on the LCD display. Press both the "UP" and
"DOWN" buttons together and the unit will reset to factory settings.
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
Artisan 1200 RGBAL Profile User Manual
10

Advertisement

Table of Contents
loading

Table of Contents