Table of Contents
Advertisement
Wireless DMX setting:
To access the units Wireless DMX setting, press "MENU" to show "OTHER WIFI" on the LCD display.
Use the "UP" and "DOWN" buttons to select the between "ON" and "OFF.
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Reset factory settings:
To reset the unit back to its factory settings, press "MENU" to show "OTHER BLGT" on the LCD display.
Press the "ENTER" button twice to show "SYSRESET" on the LCD display. Press both the "UP" and
"DOWN" buttons together and the unit will reset to factory settings.
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
IR remote functions:
01 - Sets the unit into blackout off/on (LED on/off).
02 - Runs the fade in/out mode, use the '+' and '–' buttons
to adjust the program speed.
03 - Runs the manual dimming mode. Press this button followed
by the '+' and '–' buttons to adjust brightness (000-255).
Press the Flash button followed by the '+' and '–' buttons
to adjust the flash speed.
04 - Sets the flash speed in manual dimming mode. Press this
button followed by the '+' and '–' buttons to adjust the flash
speed.
05 - Sets the unit in slave mode.
06 - Sets the DMX address. Press this button followed by the
'+' and '–'/number buttons to adjust the DMX address.
07 - Sets the DMX address, channel and dimming curve.
When in DMX address mode press this button followed by the '+'
and '–'/number buttons to adjust the DMX address.
When in DMX channel mode press this button followed by the '+'
and '–' buttons to select the required DMX channel mode.
When in dimming curve mode press this button followed by the
'+' and '–' buttons to select the dimming curve required (see
page 6 for dimming curves).
08 - Adjusts the fade in/out speed, flash speed, manual dimming
brightness, DMX address, DMX channel and dimmer curves.
09 - Number buttons to be used when setting the DMX address.
www.prolight.co.uk
Operating instructions
01
04
05
08
Artisan 1200 WW Profile User Manual
BLACKOUT
AUTO RUN
A
FLASH
DMX MODE
F
D
SLAVE
SET ADDR
SL
S
DIMMING
WW
–
+
0
1
2
3
4
5
6
7
8
9
02
07
06
03
08
09
9
Advertisement
Table of Contents
