Related Manuals for Ledj Slimline 1T36
Summary of Contents for Ledj Slimline 1T36
- Page 1 Slimline 1T36 1 x 36W tri-colour LED (RGB) User Manual Convection Optional cooled, IR remote no fan! Order ref: LEDJ90B Order codes: LEDJ57 - 1T36 Black housing LEDJ57A - 1T36 White housing...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Slimline 1T36 User Manual... - Page 3 • Bracket allows for multiple rigging or floor standing applications Specifications Slimline 1T36 • Rubber feet allow the panel to sit flat Power consumption on the floor for uplighting Power supply 100~240V, 50/60Hz • 4 push button menu with LED display Fuse F1A 250V • Side entry XLR and power connections Dimensions 210 x 220 x 120mm • IEC power input/output Weight 2.1kg • 3-Pin XLR input/output Order codes LEDJ57 - Black housing • Convection cooled LEDJ57A - White housing • Optional IR remote (LEDJ90B) 220mm 120mm www.prolight.co.uk Slimline 1T36 User Manual...
-
Page 4: Technical Specifications
POWER OUTPUT DMX OUTPUT DMX INPUT 100-240V~50/60Hz FUSE: F1A 250V MENU ENTER DOWN SLIMLINE 1T36 www.prolight.co.uk 01 - LED display 04 - IEC power input 07 - 3-Pin DMX input In the box: 1 x fixture, 02 - Function buttons 05 - IEC power output 08 - Fuse: F1A 250V 1 x power cable & 1 x user manual 03 - Earth point 06 - 3-Pin DMX output www.prolight.co.uk Slimline 1T36 User Manual... -
Page 5: Dmx Channel Mode
Pr03 - G pr04 - GB Channel Value Function Pr05 - B Pr06 - RB 000-255 Red (0-100%) Pr07 - RGB 000-255 Green (0-100%) Pr08 - Colour change (7 colours) 000-255 Blue (0-100%) Pr09 - Colour fade (7 colours) Pr10 - Colour change (3 colours) 000-255 Master dimmmer (0-100%) Pr11 - Colour fade (3 colours) No function Slave mode SLAV 001-005 Sound active (7 colours) Sound active mode SU00~SU99 006-010 No function DMX mode 3CH, 5CH 011-255 Strobe (slow-fast) Address setting A001~A512 www.prolight.co.uk Slimline 1T36 User Manual... - Page 6 To exit out of any of the above options, press the “MENU” button. Slave mode: SLAU Press the “MENU” button on the rear of the unit to show on the LED display and press the “ENTER” button to confirm the setting. The unit will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Sound active mode: SU00 To access the sound active mode, press the “MENU” button on the rear of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the SU. 0 0 SU. 9 9 sound sensitivity level from and press the “ENTER” button to confirm the setting. Value: 00 - 99 (00 = low, 99 = high) To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Slimline 1T36 User Manual...
-
Page 7: Important Notes
• N ow press the “5” button, and all of the To set the DMX address “245”; • Press the “S” button, the red LEDs will come on, R, G, B LEDs will come on, the third digit 5 has been set. The full DMX address setting you can now start to set the DMX address • Now press the “2” button, the green LEDs will has been changed • Now press the “DMX MODE” button to save come on, this means the first digit has been the new address into the memory set at 2 • N ow press the “4” button, the blue LEDs will come on, this means the second digit has been set at 4 Important notes: • Set the DMX address on each fixture before plugging into the DMX controller • The IR remote is cannot be used when the fixture(s) are being controlled by a DMX controller • The maximum transmitter distance is 10m - Please make sure that you have the IR remote aimed directly at the front panel of each fixture to be programmed • If you do not press the “DMX MODE” button after you have changed the DMX address, when you power down the fixture it will lose the address you have set www.prolight.co.uk Slimline 1T36 User Manual... -
Page 8: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Slimline 1T36 User Manual... -
Page 9: Line Termination
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Slimline 1T36 User Manual... -
Page 10: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Slimline 1T36 User Manual... -
Page 11: Optional Accessories
DMX MODE SOUND ACTIVE SLAVE SET ADDR 1 2 3 4 5 6 0 7 8 9 Optional IR remote Optional Quad Case (Holds 4 x fixtures) Order code: LEDJ90C Order code: CASE71 To keep up-to-date on the latest accessories and product range additions please visit www.prolight.co.uk www.prolight.co.uk Slimline 1T36 User Manual... - Page 12 Slimline 1T36 User Manual...