Figure 7 Connecting The Fiber Optic Cable To The Fibre Channel Tape Drive - Quantum SDLT 600 User Manual

Figure 7 Connecting the Fiber
Optic Cable to the Fibre Channel
Tape Drive
SDLT 600 Product Specification
Fiber optic cable
You can connect a Fibre Channel connector while the tape
Note:
drive is still powered on; this capability is known as "hot-
swappable" or hot-pluggable."
When connecting to the Fibre Channel port, make sure to use a
50μM Fiber core fiber optic cable with an LC, Duplex
connector.
Chapter 2 Hardware Specifications
Fibre Channel Connection
LED
Fibre Channel port
"link light"
Detail of the empty
Fibre Channel port
15