Attachments - IKA KS 130 control Operating Instructions Manual

Attachments

Attachments recommended by IKA must be connected to the shaking table to
ensure safe and secure operation. In addition , the usable weight and speed
ranges shown in the diagrams (hatched areas) must not be exceeded.
Attachments for KS 130 control:
AS 130.1 Universal attachment
Universal, steplessly adjustable clamping cylinders make it possible to adjust to
any container shape.
The universal attachment consists of:
AS 1.30 basic suspension
AS 1.5 fastening screw
AS 1.31 clamping cylinder
ATTENTION! The base suspension of the universal attachment is secured in
place by four lateral clamping screws on the agitation table.
AS 130.2 Holding bracket adapter
With additional holding brackets (AS2.1, AS2.2, AS2.3, AS2.4 and AS2.5) the
holding bracket adapter is suitable foe working with round flasks, measuring
flasks and Erlenmeyer flasks.
Recommended / maximum fitting
AS 2.1 Holding bracket
AS 2.2 Holding bracket
AS 2.3 Holding bracket
AS 2.4 Holding bracket
AS 2.5 Holding bracket
ATTENTION! The holding bracket adapter is secured in place by four lateral
clamping screws on the agitation table.
1x Dimension (WxHxD) [mm]
4x 260 x 90 x 235
3x
12 / 12 Dimension (WxHxD) [mm]
8 / 9 230 x 24 x 235
5 / 8
4 / 4
2 / 4
AS 130.3 Dish attachment
For gentle agitation at low speed, for example for Petri dishes or culture flasks.
The dish attachments are equipped with an antislip sheet that prevents the dish
from moving around during the agitation process.
ATTENTION! The dish attachment is secured in place by four lateral clamping
screws on the agitation table.
AS 130.4 Reactant glass adapter
For intensive shaking of tubes, reactant bottles, cuvettes and centrifuge tubes.
Clamping range from Ø10mm to Ø16mm for a maximum of 64 tubes.
ATTENTION! The reactant glass adapter is secured in place by four lateral
clamping screws on the agitation table.
After vessels with a large diameter have been agitated for a long time and the
equipment is readjusted for vessels with a smaller diameter, the clamping straps
must be bent back carefully to ensure that they clamp securely.
Attachments for KS 260 control / HS 260 control:
AS 260.1 Universal attachment
Universal, steplessly adjustable clamping cylinders make it possible to adjust to
any container shape.
The universal attachment consists of:
AS 1.60 basic suspension
AS 1.5 fastening screw
AS 1.61 clamping cylinder
ATTENTION! The base suspension of the universal attachment is secured in
place by four lateral clamping screws on the agitation table.
Dimension (WxHxD) [mm]
420 x 33 x 270
Dimension (WxHxD) [mm]
228 x 95 x 234
1x Dimension (WxHxD) [mm]
8x 425 x 135 x 334
4x
25