Display; Switching On - IKA KS 130 control Operating Instructions Manual

Display

A B
E
The LED lights up at the same time as the set value is
A Set indicator
displayed or setting of the value.
B Speed display Display the speed value.
C Timer display Display the time value.
D Locking function status indicator Indicates that the locking function is active.
E Shaking function status indicator Indicates that the shaking function is active.
Indicates that the device is controlled externally, via the
F External control indicator
interface, e.g. by a PC.

Switching on

Switch on the device via the power switch (rocker switch) on the front of it.
C D
After switching on, a self-test is carried out, all display elements light up, a short
signal sounds and the safety-relevant functions are checked.

F



Note: In mode A, as long as the LED of the set indicator flashes, the speed limit
can be set by turning the left knob.
If no changes are made for a period of 3 seconds, the speed limit saved and the
LED of the set indicator stops flashing.
Self-test
Device type: e.g. KS 130
Software version: 0.01 Operating mode: A
Speed limit: 230 rpm
21