Saving Settings - Buffalo TS3210DN User Manual

Settings &
Firmware
Write down the drive configuration (number of drives, RAID, LVM, etc.) of the TeraStation whose settings were saved.
Make sure that any TeraStations that you apply these settings to have exactly the same drive configuration before
you apply the settings. If the drive configuration is different, you may get unexpected results.
The following settings are not saved or restored:
Category
File Sharing
Storage
Web Services
Network
Backup
Management

Saving Settings

1
Insert a 1 GB or larger USB drive (not included) into a USB port on the TeraStation.
Note: All data on the USB drive will be erased!
2
From Settings, click Management.
3
Click to the right of "Configuration Management".
Save
Settings
Subfolders' access restriction settings in the shared
folders
All settings for USB drives
All settings in "Drives"
All settings in "LVM"
All settings in "iSCSI"
USB drive information
Job settings of Dropbox Sync
All settings except for service port restrictions, Wake-on-
LAN, and MTU size settings in "IP Address"
All settings in "Port Trunking"
All settings in "Failover"
The TeraStation's hostname
All settings in "Power Management"
All settings in "SSL"
Display language in Settings
156
Restore
Restore
Restore
Settings &
Firmware
Settings &
Firmware
Settings &
Firmware