Table of Contents
Advertisement
Code
Description
Invalid characters were used in
the filename or folder name of
the backup destinations.
The backup destination files
were updated while the
backup job was running.
Code 23
The TeraStation backed up the
data to the FAT32-formatted
USB drive, then the upper- or
lowercases of filename and
folder name on the backup
source TeraStation were
changed.
The backup destination files
Code 24
were updated while the
backup job was running.
The Ethernet cable was
disconnected from the
Code 30
backup source or destination
TeraStations while the backup
job was running.
Insufficient TeraStation
B14
memory.
B101
The backup destination
TeraStation does not exist.
B102
The backup source folders on
B103
the backup source TeraStation
do not exist.
Corrective Action
Change the filename or folder
name using compatible characters.
Available characters are described in
the "Adding a Shared Folder" section
in chapter 3.
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
Do not change the upper- or
lowercase of filenames and folder
names on the backup source
TeraStation if the backup destination
USB drive is formatted to FAT32. Linux
on the TeraStation is case-sensitive
but FAT isn't, so the same filename
and folder name that only differs
in upper- or lowercase will not be
identified and treated as the same file
or folder. To back up properly, using
XFS or ext3 is recommended.
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
Reconnect the Ethernet cable.
Restart the TeraStation and try again.
Check that the backup destination
TeraStation is turned on, the Ethernet
cables are securely connected,
and the hostname of the backup
destination TeraStation is not
changed.
Check that the backup destination
folders on the backup destination
TeraStation exist in the shared folder
list and the backup destination
folders are configured for backup in
Settings.
Check that the backup source folders
on the backup source TeraStation
exist in the shared folder list.
83
Log Example
rsync error: some
files could not be
transferred (code 23)
at main.c(702)
rsync warning:
some files vanished
before they could be
transferred (code 24)
at main.c
rsync error: timeout
in data send/receive
(code 30) at io.c(195)
[sender=3.1.0]
-
-
-
-
Advertisement
Table of Contents
