4
Set the RAID mode to "RAID 1".
5
Select the "Add a drive to a RAID array with RMM. Your data will be preserved. " checkbox.
6
Select the drive whose data will be saved from the drop-down list.
7
Select the drive to add to the RAID array.
8
Click Create RAID Array.
9
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
10
Click OK when finished.
Adding a Drive to an Existing RAID Array or Changing the RAID Mode While Adding
a Drive
You can add a drive to a RAID 1 or RAID 5 array. Drives in JBOD can be added to the RAID array.
Note: RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM must
be performed multiple times.
1
From Settings, click Storage.
2
Click
to the right of "RAID".
49