Installation -
Installation
Template Sheet
1
Detach the camera's cover dome from the camera's
module by unscrewing the three cover dome screws
using the L-wrench.
2
Use the camera or mounting template to mark and
drill the necessary holes in the wall or ceiling.
3
Pull wires through and make connections.
4
Using two (2) included screws, mount and secure the
camera to the mounting surface.
5
Secure the camera's cover dome onto the camera
base to complete the installation.
Put the Lan cable into (a), then (b) will be assembled to (a)
without making any space.
Warning:
DO NOT TOUCH THE SURFACE OF THE BUBBLE.
CleanView™ Hydrophobic Dome Coating Repels.
c
b
a