Fuel And Chain Lubrication Oil; Chain Lubrication Oil; Motor Operation - Fieldmann FZP 4001-B Manual

8. FUEL AND CHAIN LUBRICATION OIL

Fuel (fig. 7)
Mix common petrol (lead or lead-free, alcohol-free) with quality oil used in air-cooled two
stroke engines (manufacturer recommended oils).
Recommended fuel mixing ratios:
When using
up to 20 hours
over 20 hours
25:1 Mixing ratio table
Liters of petrol
Oil for two-stroke engines in ml
CAUTION! Do not smoke or use naked flame in fuel storage area and when handling the
fuel.Please mix and store the fuel in a dedicated petrol can only.
Note: Used fuel is the usual cause of most engine failures. Do not mix petrol with oil
designed for four-stroke engines.
Chain lubrication oil (fig. 8)
Please use engine oil SAE#10W~30 all year round, engine oil SAE#30~#40 in summer and
engine oil SAE#20 in winter (manufacturer recommended oils).
Note: Do not use already used or recycled oil; otherwise, oil pump damage could occur.

9. MOTOR OPERATION

Controls
Hole for filling oil for chain lubrication (1) (Fig. 9)
Refuel hole (2) (Fig. 9)
Engine switch (3) (Fig. 10)
Accelerator control lever (5) (Fig. 11)
Safety lock of accelerator control lever (6) (Fig. 1 1)
Choke (7) (Fig. 1 2)
Fuel pump/primer (8) (Fig. 12)
Starter (2) (Fig. 1)
CHAINSAW
Fuel and chain lubrication oil | Motor operation
1 2
40 80 120
Petrol: Oil
20:1
25:1
3 4 5
160 200
INTSTRUCTIONS FOR USE
21
EN