Fieldmann FZP 4001-B Manual page 15

Explanation of instruction labels attached to the machine 15
EN
H position of the screw (used to set
high
speed)
L position of the screw (used to set low
speed)
The T position is used to set
idle speed.
Position: rear left of the unit
Please read the instructions for use
carefully before using the machine.
When operating the machine, please
wear protective aids such as glasses,
hearing protectors, etc.
Always use both hands when operating
your chainsaw.
Caution! Kickback hazard
Warning! Caution!
CHAINSAW INTSTRUCTIONS FOR USE