Cable Connections And Switches; Dvi-D Input; Dvi-D Output - Extron electronics DVI DL 201 Tx User Manual

Cable Connections and Switches

DVI-D Input

Connect the DVI-D source device to the female DVI-I input connector.
The dual link DVI-D input carries a signal with a resolution up to 2560x1600 @ 60 Hz.
For sources providing HDMI signals, use an HDMI to DVI adapter, such as the Extron
HDMIF-DVIDM female HDMI to male DVI-D adapter (part number 26-616-01). The pin
assignments for the DVI-I input connectors are shown in the table below.

DVI-D Output

Connect the local display device to the female DVI-I output connector on the rear panel of
the transmitter and the remote display device to the output connector on the front panel
of the receiver.
The dual link DVI-D output carries a signal with a resolution up to 2560x1600 @ 60 Hz.
The pin assignments for the DVI-I output connectors are the same as those for the input
connectors and are shown in the table below.
NOTE:
Pin
Although DVI-I connectors are used, the DVI DL 201 is compatible only with
DVI-D signals.
DVI Dual Link - Female
1
9
17
Signal Pin
1 TMDS data 2– 9 TMDS data 1–
2 TMDS data 2+ 10 TMDS data 1+
TMDS data
3 11
2/4 shield
4 12
TMDS data 4- TMDS data 3-
5 TMDS data 4+ 13 TMDS data 3+
6 DDC clock 14
7 DDC data 15
8 CEC control* 16 Hot plug detect
*CEC control on pin 8 is a proprietary usage and is not the
industry standard
8
24
Signal Pin Signal
17 TMDS data 0–
18 TMDS data 0+
TMDS data TMDS data
19
1/3 shield 0/5 shield
20
TMDS data 5-
21 TMDS data 5+
TMDS clock
+5 V power 22
shield
Ground 23 TMDS clock+
24 TMDS clock–
DVI DL 201 Tx/Rx • Panels and Cabling 6