Table of Contents
Advertisement
Descriptions of the Menu Screens
2. Time/DIV display area
1. Status message display area
19. Data capture bar
17. Scale upper limit
18. Waveform display area
17. Scale lower limit
16. File name display area
1.
Status message display area
2.
Time/DIV display area
3.
Status mark
: Appears when neither capture nor replay is in progress.
: Displayed when the captured data is being recorded.
: Appears when waiting for a trigger during capturing and for the stop key after capturing.
: Displayed when replaying the captured data.
: Displayed when replaying during capturing the data (Refer to in "3.2 Key Operation" - "(10) REVIEW".).
Please do not turn Off the power and do not remove the SD card or USB memory when the status mark indicates
other than "STOP". The data is damaged, and it will not be accessable.
Please start the operation after making sure that the status mark is switched to "STOP".
4.
Device access display (Internal memory)
: Internal memory is recognized but is not being accessed.
: Internal memory is being accessed. While the internal memory is being accessed, the POWER LED also flashes.
5. Device access display
(SD card)
4. Device access display
(Internal memory)
3. Status mark
: Displays the operating status.
: Displays the current time scale.
: Displays the status mark.
6. Device access display
(USB memory)
7. Remote lamp
8. Key lock display
9. Clock display
：
15. Level bar
14. Alarm display area
10. AC/Battery status indicator
11. Digital display area
12. Quick settings
13. Internal RAM
information
10
Advertisement
Table of Contents
