Technical Data; General Data - Sartorius PMA.Vision VIS1Y EU Series Operating Instructions Manual

15 Technical Data

15.1 General Data

Specification
Scale
Supply voltage
Input voltage
Power consumption
Further data
Ambient conditions
The specifications apply under the following ambient conditions:
Environment
Operational capability
Storage and shipping
Relative humidity
Ex-link converter interface connection
Electromagnetic Compatibility
Interference resistance
Transient emissions
Available application programs
Power supply YEPS01-USB
USB power plug
Primary
Secondary
Further data
Ex-Link Converter YCO17-Z
Further data
Unit Value
Only via Sartorius power supply YEPS01-USB
V +5.0
DC
W 5.1
IP40 in accordance with EN 60529/IEC 60529
For indoor use only.
°C Guaranteed between +5 and +40.
°C -10 to +60
% Up to 80% for temperatures up to 30°C non-condensing, decreasing
linearly up to 50% relative humidity at 40°C.
Ethernet
In accordance with EN 61326-1/IEC61326-1 Electrical equipment for
measurement, control and laboratory use – EMC requirements – Part 1:
General Requirements.
Basic requirements
Class B
Suitable for use in residential areas and areas that are connected to a low
voltage network that also supplies residential buildings.
Verified scales in accordance with EU requirements comply with the
requirements of Council Directive 2014/31/EU with EN 45501:2015 and
OIML R76:2006.
* For verified scales in accordance with EU requirements, refer to the
information on the scale.
** For verified scales in accordance with EU requirements, the legal
regulations apply.
Recalculation, factor calculation, formula
Type FSP007-P01P (manufacturer's designation)
100 – 240 V~, ±10%, 50 – 60 Hz, ±5%, ≤ 0.2 A
5.2 V , ± 5%, 1.4 A (max.)
DC
Protection class II
IP40 in accordance with EN 60529/IEC 60529
IP40 in accordance with EN 60529/IEC 60529
Technical Data
VIS1Y
Operating Instructions 53