Link/Act Led ( 1, 2, M); Speed Led ( 1, 2, M) - NEC N8100-1983F User Manual

Chapter 1 General Description
4.5.6
LINK/ACT LED ( 1,
This LED indicates the status of the LAN port.
The following table lists LINK/ACT LED patterns.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
4.5.7
SPEED LED ( 1,
This LED indicates which network interface is used.
− Two onboard LANs (
− Management LAN (
The following table lists LINK/ACT LED patterns.
SPEED LED pattern
On (amber)
On (green)
Off
42
2, M)
The server is connected with network correctly.
The server is accessing network.
The server is disconnected from network.
2, M)
1, 2) support 1000BASE-T, 100BASE-TX, and 10BASE-TX.
M) supports 100BASE-TX.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/T110f-S User's Guide
4. Names and Functions of Parts
Description
Description