Hisense H30MOBS10HC Instruction Manual page 24

MOUNTING THE MICROWAVE OVEN
INSTALLATION
24
1. Make sure all packing materials are removed from
the inside of the door.
2. Inspect the oven after unpacking for any visual damage
such as:
– misaligned door,
– damaged door,
– dents or holes in door window and screen,
– dents in cavity.
If any of the above are visible, DO NOT use the oven.
3. This microwave oven weighs 19,4 kg and must be placed
on a horizontal surface strong enough to support this
weight.
4. The oven must be placed away from high
temperature and steam.
5. DO NOT place anything on top of the oven.
6. Keep the oven at least 20 cm away from both sidewalls.
7. DO NOT remove the turntable drive shaft.
8. As with any appliance, close supervision is
necessary when used by children.
9. Make sure that the AC outlet is easily accessible so that
the plug can be removed quickly in an emergency.
Otherwise, it should be possible to disconnect the device
using a switch from the circuit. In this case, the existing
provisions of the electrical safety standards should be
observed.
The product has to be correctly connected to an earthed
socket with a single-phase AC (230 V/50 Hz). WARNING!
THIS APPLIANCE MUST BE EARTHED!
10. This oven requires 1.5 kVA of input power. Consultation
with a service engineer is suggested when installing the
oven.