Specifications; General Specifications - Fluke 972A User Manual

Specifications

General Specifications

Temperature
Operating
Storage
Altitude
Operating
Storage
Relative Humidity
Operating
Storage
Power Supply
Battery Type
Battery Life
Safety
Dimensions
(H x W x D)
Weight
Electromagnetic Environment (EMC)
International IEC 61326-1: Portable, Electromagnetic Environment; IEC 61326-2-2; CISPR 11:
Group 1；Class A
Group 1: Equipment intentionally generates and/or uses conductive-coupled RF energy, which is
necessary for its internal operation.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly
connected to a low-voltage power supply network that supplies buildings used for domestic purposes.
There may be potential difficulties in ensuring electromagnetic compatibility in other environments due
to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential environments and may not provide
adequate protection to radio reception in such environments.
Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller
or user should take notice of it. This equipment is intended for use in business environments and not
to be used in homes.
IP Rating
972A
-30 °C to 70 °C
-30 °C to 70 °C, <80 % RH (without battery)
2 AAA Batteries
1000 hours for continuous operating, backlight off
IEC61010-1, Pollution Degree 2
211 mm × 58 mm × 40 mm
172 g (body)
IEC 60529: IP30, non-operating
972B
2000 m
12 000 m
0 % RH to 99 % RH
<80 % RH
Temperature Humidity Meter
Specifications
972 ES
-40 °C to 70 °C
-40 °C to 70 °C,
<80 %RH
—
—
264 mm × 33 mm ×
28 mm
127 g
15