Fluke 972A User Manual page 9

No. Item
e
Backlight /
Save button
f
Temperature /
Humidity button
or
Wet bulb/dew
point button
The Meter has a backlight for easy reading of the screen in dim
environments.
Push to turn on or off the backlight function during measuring.
If users do not perform any operation within 5 minutes, the backlight
will automatically turn off to save battery power.
(972B only)
Press and hold for at least 2 seconds during measurement or Hold mode
to save the current measurement data to the memory.
See Screen and Save Measurement Data
Temperature/Humidity switch button (972A only)
The Meter shows the current measured temperature and humidity by default
after it is powered on, and each time the button is pressed briefly, the Meter
steps through these screens:
- Temperature only
- Humidity only
- Both temperature and humidity
Wet bulb / dew point temperature button (972B only)
Each time the button is pressed briefly during measuring or recalling
measurement data, the temperature display area on the screen steps
through:
- Both humidity and wet bulb temperature
- Both humidity and dew point temperature
- Both temperature and humidity
See Screen and Wet Bulb and Dew Point
(972B only)
Press and hold for at least 2 seconds during measurement or hold mode
to recall the historical data stored in the Meter.
See Screen and Recall
Temperature Humidity Meter
Description
Note
for details.
for details.
Historical Data for details.
Product Familiarization
5