baltur TBL 360P Instruction Manual For Installation, Use And Maintenance page 68

ENGLISH
CAUTION / WARNINGS
The housings for the cables for the pins are provided
respectively for cable Ø 9.5÷10 mm and Ø 8.5÷9 mm: this
ensures the burner protection rating (Standard IEC EN60529)
for the electrical panel.
• To reclose the electrical panel lid, fix the screws (1) with a torque
of about 5 Nm to ensure the correct seal.
To gain access to the control panel (8), slide the transparent door
(7) for a short distance following the direction on the arrow indicated
in the figure exerting slight pressure with a tool (e.g. a screwdriver)
following the arrows' direction and slide it for a short distance to se-
parate it from the cover.
• To secure the transparent door on the panel properly, position
the hooks at their hooking points (9), slide the door in the di-
rection indicated by the arrow until you hear a click that ensures
its seal.
CAUTION / WARNINGS
Only professionally qualified personnel may open the burner
electrical switchboard.
9
22 / 44
0006081053_202301
8
7
9
9
9