Table of Contents
Advertisement
Bleeding the drive system
IMPORTANT INFORMATION
Ensure cleanliness. Used oil may not be
reused. Handle waste oil as environmental
hazardous waste. Avoid skin contact; wash
with soap and water in case of spillage. See
"Hydraulic Hygiene" on page 118.
IMPORTANT INFORMATION
The tank must never be run empty while
work is underway. Fill the tank completely
when filling. Risk of air penetration into the
system.
IMPORTANT INFORMATION
When the controls for the release valves
(bypass valves) in the front or the rear axles
are extended and the engine is running, the
drive pedals must not be activated.
1.
Lift and jack up the machine so that all
wheels can rotate freely.
2.
Remove the transmission cover.
!
WARNING!
Danger of carbon monoxide when
running the engine while working.
3.
Fit an exhaust hose.
72
English-
REPAIR INSTRUCTIONS
Jacking up
Transmission cover
Advertisement
Table of Contents
