Error Display - Plus M-10S Service Manual

Copy board
Hide thumbs Also See for M-10S:
Table of Contents

Advertisement

2-4. Error Display

Confirm the contents of the table shown below when E1 to E6 and the
blink display (blinks for ten seconds) appear on the display window of
the operation panel.
Error display number
E1
Printer failure
E2
Memory card not
recognized
E3
Defective memory
storage
E4
Defective memory
clear
E5
Read failure
E6
Internal memory
failure
Description
• A printer cable is not connected.
• The power of a printer is not turned on.
• Paper is not put in a printer.
• The error lamp of a printer blinks.
• A memory card is not formatted.
• An incompatible memory card is used.
• A CF adaptor is not properly inserted when it
is used.
• A memory card is defective.
• An error occurred during memory storage.
• An error occurred during memory erasure.
• A fluorescent lamp does not light properly.
• A read signal error occurred.
• A memory read/write error during internal
memory initialization occurred when the
power plug is inserted into the wall outlet.
• Check the connection of a printer.
• Check the power of a printer.
• Check the paper in a printer.
• See the Instruction Manual of a
printer.
• Format the memory card using a
personal computer.
• Browse our homepage for the
memory card and CF adaptor that
can be used in this unit.
(http://www.plus-vision.com)
• Check that the CF adaptor is in-
serted properly.
• Check the operation using a per-
sonal computer.
• Check that a memory card is not
removed or inserted during stor-
age.
• Repeat storage again.
• Main Board Assy is defective.
• Check that a memory card is not
removed or inserted during stor-
age.
• Repeat storage again.
• Main Board Assy is defective.
• Turn off the power once, turn on it
again, and perform the copy opera-
tion.
• A fluorescent lamp reached its life
span or it is defective.
• The CCD Board Unit is defective.
• Adjust the CCD read position.
• Pull out the power plug from the wall
outlet and insert it into the wall out-
let again.
• Main Board Assy is defective.
 6
SPECIFICATIONS
OK
Cancel
COPY
MEMORY
Remedy

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-10wM-10

Table of Contents