9) Remove the Sheet Motor Assy. (See Fig. 16.)
1. Remove the "S-4" screw shown in Fig. 16.
Note:
Adjust the tension of the Timing Belt when the Sheet
Motor Assy is installed. (See 5. Adjustment.)
10) Remove the Endless Sheet. (See Figs. 17, 18, and 19.)
1. Push the sheet roller section inside as shown in Figs. 17 and 18.
2. Remove the Endless Sheet as shown in Fig. 19.
Note:
• Be careful not to damage or fold it when handling the Endless Sheet.
Fig. 17
DISASSEMBLY AND ASSEMBLY
S-4
Sheet Motor Assy
Motor Harness
13
Fig. 16
Endless Sheet
Fig. 18
Endless Sheet
Fig. 19