Table of Contents
Advertisement
11) Remove the Fluorescent Lamp. (See Fig. 20.)
1. Rotate the Fluorescent Lamp as shown in Fig.
20 and remove it from the lamp socket.
Note:
Be careful not to knock it against a frame and dam-
age it when the Fluorescent Lamp is installed and
removed.
12) Remove the Lamp Socket Unit. (See Fig. 21.)
1. Remove the "S-5" screw shown in Fig. 21 and
then remove the Lamp Socket Unit.
2. The Lamp Socket Unit is fixed to the board frame
using a cable tie. Therefore, the cable tie is re-
moved using cutting pliers.
Note:
Fix it using a cable tie again when installing the
Lamp Socket Unit.
DISASSEMBLY AND ASSEMBLY
Fluorescent Lamp
S-5
S-5
14
Fig. 20
Lamp Socket Unit
Fig. 21
Advertisement
Table of Contents
