Table of Contents
Advertisement
4-4.Disassembly and Assembly
This section describes one example of disassembly and assembly procedures. For the actual operation,
disassemble and assemble the required parts with reference to "4-3. Disassembly and Assembly Procedures".
1) Remove the Back Panel. (See Figs. 1 and 2.)
1. Remove the "S-1" screw shown in Fig. 1 and then remove the Back Panel Corner.
2. Remove the Back Panel as shown in Fig. 2.
Fig. 1
2) Remove the Main Board Assy. (See Figs. 3, 4, and 5.)
1. Disconnect the connectors (CN2, CN6, CN10, and
CN11) connected to the Main Board Assy shown in
Fig. 3.
2. Remove the "S-12" screw shown in Fig. 4 and then
remove the Main Board Section.
3. Remove the "S-7" screw shown in Fig. 5 and then
remove the Main Board Assy.
S-12
Main Board Section
Fig. 4
S-1
Back Panel Corner
S-12
9
DISASSEMBLY AND ASSEMBLY
Fig. 2
CN10
CN2
CN6
CN11
(16pin)
(6pin)
(9pin)
(20pin)
Fig. 3
S-7
Fig. 5
Back Panel
S-7
Main Board Shield
Main Board Assy
Main Board Box
Advertisement
Table of Contents
