Table of Contents
Advertisement
2-3. Operation Panel of Main Unit
5
13
6
8
11
10
1
During button operation, press the center (round convex se-
ction) of the button. Do not press the corner of the button.
No function operates in this case.
1 POWER button (Power supply)
Press this button to turn on and off the power of the copy
board.
2 COLOR button (Color)
Press this button to select whether to print a sheet in
"color" or "monochrome".
The Color lamp lights when you select "color".
* When a monochromatic printer has been connected, a
sheet is printed in monochrome even if you select "color".
OK
Cancel
COPY
MEMORY
REPEAT
FEED/STOP
Density
MemoryClear
POWER
COLOR
M-10
3 Color (color mode) lamp
This Color mode lamp lights in green when you select
"color" using a Color button.
4 +/- button (Setting of printed sheet count)
Press the + or ? button to set the number of printed sheets.
(The maximum number of printed sheets is 20.)
The number of printed sheets appears on the display
4
window.
5 Display window
The printed sheet count, print density, memory storage
operating state, or error information is notified using
seven-segment LED. See page 22 for details of the error
information.
7
6 COPY button (Print)
The sheet is moved for read operation by one plane and
printed proportionally to the number of printed sheets.
9
7 MEMORY button (Memory storage)
The sheet is moved for read operation by one plane and
stored in a compact flash card.
8 REPEAT button (Repeat)
12
The previously printed sheet plane is printed once again.
(The sheet is not then moved.)
The number of printed sheet can be changed, but the density
and color/monochrome cannot be changed.
3
9 FEED/STOP button (Feed/Stop)
The sheet is scrolled to the left by one plane and stopped
automatically. The scroll stops when you press this button
2
during scrolling.
10 Density button (Copy density)
Press the Density button to select "Standard" or "Dark" as
the density of a print. The Density lamp lights when you
select "Dark".
11 Density (density mode) lamp
This density lamp lights in green when you select "Dark"
using a Density button.
12 Memory Clear button
The Clear mode lamp blinks when you press the Memory
Clear button. (The maximum number of files ("max 99")
blinks and appears on the display window.)
All data in the PVW folder of a compact flash card is cleared
when you press the OK(+) button.
Press the "Cancel" (-) button when you do not want to clear
all data. The display window returns to the display of the
printed sheet count.
13 Clear (clear mode) lamp
This Clear mode lamp lights in orange when you press the
Memory Clear button and when the unit is put into the clear
mode.
5
SPECIFICATIONS
(Overall compact flash card clear)
Advertisement
Table of Contents
