Beckhoff KS31 2 Series Manual page 51

Key
Bit Name
R32.15* CallibrationDisplay
R32.14* Display StabilityError 0
Fluctuating measuring signals
Strongly fluctuating measuring signals can make stabilization of the calibration values impossible. In
this case, skip the stabilization and disable it with bit R32.7.
Bit Name
R32.13 -
R32.12 -
R32.11 disChannel
R32.10 enTh2
R32.9 enTh1
R32.8 enOverProt
R32.7 enStable
R32.6 disDiffMeasure
R32.5 disCali
R32.4 enSiemensFormat
R32.3 enAverageFormat
R32.2 disWdTimer
R32.1 enManScal
R32.0 enUsrScal
*) Bit R32.14 and bit R32.15 are only available with the following firmware versions:
• KL3132, KL3152, KL3162, KL3172, KL3182: Firmware version 2B or higher
• KL3142: Firmware version 2C or higher
KL31x2/KS31x2
Description
0
During the calibration, the terminal sets the overload bit SB1.1
bin
[} 44] and the underload bit SB1.0 [} 44].
1 Compatibility mode: During calibration, the terminal sets the
bin
error bit SB1.6 [} 44].
Stability error is not displayed.
bin
1
If no stabilization [} 16] of the calibration values is achieved,
bin
the terminal indicates this by setting the error bit SB1.6 [} 44].
(see note below)
Description
reserved
reserved
0 Channel switched on
bin
1 Channel switched off
bin
0 Limit value 2 is not active
bin
1 Limit value 2 is active
bin
0 Limit value 1 is not active
bin
1 Limit value 1 is active
bin
0 Measuring range limitation not active
bin
1 Measuring range limitation active
bin
0
Stabilization [} 16] of the calibration value not active
bin
1
Stabilization [} 16] of the calibration value active
bin
0 Differential measurement active
bin
1 Differential measurement not active (only KL3132, KL3162,
bin
KL3172, KL3182)
0 Cyclic calibration of the A/D converter active
bin
1 Cyclic calibration of the A/D converter not active
bin
0 Siemens output format not active
bin
1 Siemens output format active
bin
0 Signed amount representation not active
bin
1 Signed amount representation active
bin
0 Watchdog timer is active (the watchdog is triggered if no
bin
process data are received for 100 ms)
1 Watchdog timer is not active
bin
0 Manufacturer scaling is not active
bin
1 Manufacturer scaling is active
bin
0 User scaling is not active
bin
1 User scaling is active
bin
Version: 2.6.0
Data structures
default
0
bin
0
bin
default
0
bin
0
bin
0
bin
0
bin
0
bin
1
bin
1
bin
0
bin
0
bin
0
bin
0
bin
0
bin
KL3162, KL3172, 0
bin
KL3142, KL3152:
KL3132, KL3182: 1
bin
0
bin
51