Netvanta 1534 Series; Figure 4. Netvanta 1531P Rear Panel Layout - ADTRAN NetVanta 1531 Series Hardware Installation Manual

NetVanta 1531/1534/1544 Series
NetVanta 1531P Rear Panel Design
The NetVanta 1531P rear panel is shown below.
Rear Panel Interface
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 37

NetVanta 1534 Series

The NetVanta 1534 Series is a Layer 3 Lite managed switch. The entire series runs AOS, is managed through
an EIA-232 CONSOLE port (DB-9), Telnet session, or GUI, and is RoHS compliant (telecommunications
exemption). The NetVanta 1534 Series units are described in the following sections.
The NetVanta 1534 is housed in a 1U-high, rack-mountable metal enclosure that is half the width of a standard
19-inch rack, allowing two units to be mounted side by side using an optional dual mounting tray. It includes a
universal AC power supply and the front panel contains 24 10/100/1000Base-T Ethernet interfaces that are
accessed via standard RJ-45 connectors. Two 1000Base-X SFP slots and two 2500Base-X slots (all supporting
industry standard small SFP modules) are available on the rear panel for high-speed uplink via fiber or copper.
The NetVanta 1534 EIA-232 CONSOLE port (DB-9) is located on the rear panel.
The NetVanta 1534P is housed in a 1U-high, rack-mountable metal enclosure that can be mounted in a standard
19-inch rack and includes a universal AC power supply. The front panel contains 24 10/100/1000Base-T
Ethernet interfaces that are accessed via standard RJ-45 connectors. Two 1000Base-X SFP slots and two
2500Base-X slots (all supporting industry standard SFP modules) are also available on the front panel for
high-speed uplink via fiber or copper. The NetVanta 1534P EIA-232 CONSOLE port (DB-9) is located on
the front panel.
Redundant Power Supply
All NetVanta 1534 and 1534P units provide a connection for an optional RPS on the rear panel. The
NetVanta 1131 RPS/EPS (P/N 1700530F1) is sold separately. When connected, the RPS will provide 120 W of
backup power should the internal power supply fail. The units will automatically switch to RPS when needed,
providing uninterrupted power to the unit.
Extended Power Supply
The NetVanta 1534P unit also provides a connection for an optional EPS on the rear panel. The NetVanta 1131
RPS/EPS (P/N 1700530F1) is sold separately. When an EPS is connected, the internal and external supplies will
use load sharing to provide up to 740 W of power for PoE applications. In the event that the internal power
supply fails, the EPS will provide up to 370 W of power for PoE applications. The units will automatically
switch to EPS when needed, providing uninterrupted power to the unit.
61702590G1-34H
AC INPUT

Figure 4. NetVanta 1531P Rear Panel Layout

for connection details.
Copyright © 2019 ADTRAN, Inc.
Physical Descriptions
Supplying Power to
13