Introduction; Netvanta 1224 And Netvanta 1224St; Netvanta 1224Str (Ac) And Netvanta 1224R - ADTRAN NetVanta 1000 Series Hardware Installation Manual

1.

INTRODUCTION

This hardware installation guide lists the NetVanta 1000 and 1000R Series units' specifications, describes
the physical characteristics of the units, introduces basic functionality, and provides installation
instructions. All NetVanta 1000 and 1000R Series units run the ADTRAN Operating System (AOS) and
are managed through an EIA-232
Rear Panel Design on page 24 for more information. For more information on switch configuration for a
specific application, refer to the documents provided on the ADTRAN OS System Documentation CD. For
details on the command line interface, refer to the Command Reference Guide (also included on the CD).
In this document, the term "NetVanta" means the NetVanta 1224/ NetVanta 1224 PWR,
NetVanta 1224ST/NetVanta 1224ST PWR, NetVanta 1224STR (AC and DC)/NetVanta
1224STR PWR, NetVanta 1224R/NetVanta 1224R PWR, and NetVanta 1524ST. If a
statement only applies to one particular unit, the text refers to the unit individually.
Additionally, unless otherwise specified, descriptions for a NetVanta 1000 or 1000R Series
device will also apply to the Power over Ethernet (PWR) version of that device.

NetVanta 1224 and NetVanta 1224ST

The NetVanta 1224 and the NetVanta 1224ST are managed switches housed in a 1U-high rack-mountable
metal enclosure that includes a universal AC power supply. Both the NetVanta 1224 and the NetVanta
1224ST front panels contain 24 10/100BaseT Ethernet ports (RJ-45). In addition, the NetVanta 1224ST
front panel contains two Gigabit Ethernet interfaces that provide two fixed RJ-45 connectors and two
standard small form-factor pluggable (SFP) slots for connectivity over fiber. (Use either the RJ-45
connectors or the SFP slots. The fiber slots have precedence.)

NetVanta 1224STR (AC) and NetVanta 1224R

The NetVanta 1224STR (AC version) and NetVanta 1224R are managed switches containing a
multi-service router, housed in a 1U-high rack-mountable metal enclosure that includes a universal AC
power supply. The front panels of the NetVanta 1224STR and NetVanta 1224R contain 24 10/100BaseT
Ethernet ports. In addition, the NetVanta 1224STR front panel contains one Gigabit Ethernet interface
which providing a fixed RJ-45 connector and one standard small form-factor pluggable (SFP) slot for
connectivity over fiber. (Use either the RJ-45 connector or the SFP slot. The fiber slot has precedence.)
Both units contain a single Network Interface Module (NIM) slot on the rear panel that supports the
following modules:
• 1200861L1
• 1202862L1
• 1202863L1
• 1200872L1
• 1200868E1/L1
• 1200878E1/L1
• 1200866E1/L1
• 1200867L1
• 1200869E1/L1
• 1200889E1/L1
61200500L1-34J
port (DB-9) located on the rear panel. Refer to Reviewing the
CONSOLE
56K/64K NIM
T1/FT1 NIM
T1/FT1 + DSX-1 NIM
Dual T1 NIM
E1/FE1 NIM
E1/FE1 + G.703 Drop NIM
Serial Interface Module
SHDSL NIM
ADSL NIM, Annex A
ADSL NIM, Annex B
Copyright © 2006 ADTRAN, Inc. 17