Physical Descriptions; Netvanta 1531 Series - ADTRAN NetVanta 1531 Series Hardware Installation Manual

Physical Descriptions

2. PHYSICAL DESCRIPTIONS

NetVanta 1531 Series

The NetVanta 1531 Series is a Layer 3 Lite managed switch. The entire series runs ADTRAN Operating
System (AOS), is managed through an EIA-232 CONSOLE port (DB-9), Telnet session, or web-based
graphical user interface (GUI), and is RoHS compliant (telecommunications exemption). The
NetVanta 1531 Series units are described in the following sections.
The NetVanta 1531 Series is housed in a 1U-high, rack-mountable metal enclosure that is half the width of a
standard 19-inch rack, allowing two units to be mounted side by side using an optional dual mounting tray. It
includes a universal AC power supply and the front panel contains 10 10/100/1000Base-T Ethernet interfaces
that are accessed via standard RJ-45 connectors. Two 1000Base-X small form-factor pluggable (SFP) slots
(supporting industry standard small SFP modules) are available on the front panel for high-speed uplink via
fiber. The NetVanta 1531 EIA-232 CONSOLE port (DB-9) is located on the front panel.
SFP Module Slots
The NetVanta 1531 Series units support two 1000Base-X SFP slots on the front panel that accept a number of
industry standard SFP modules. The SFP modules provide Gigabit Ethernet fiber connectivity for high-speed
uplinks or switch stacking. For a list of supported SFP modules, visit the ADTRAN website at
http://www.adtran.com.
Power over Ethernet
The NetVanta 1531P unit provides the same basic functionality as the NetVanta 1531 product. PoE provides the
ability to detect attached powered devices (PDs), and deliver 48 VDC to the PD via Ethernet cabling. The
NetVanta 1531P is fully compliant with the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards. By default,
the PoE switch discovers and provides power to IEEE-compliant PDs. The NetVanta 1531P also supports legacy
PDs.
NetVanta 1531 Series Shipping Contents
Each NetVanta 1531 Series unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit,
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
the ADTRAN website at http://www.adtran.com/support).
Domestic shipments of the NetVanta 1531 Series includes the following items:
• NetVanta 1531 base unit
• A detachable power cable with a grounded, three-prong plug
• Quick start guide
International shipments of the NetVanta 1531 Series includes the following items:
• NetVanta 1531 base unit
• All necessary power cords
• Quick start guide
10 Copyright © 2019 ADTRAN, Inc.
NetVanta 1531/1534/1544 Series
Support
61702590G1-34H
page on