13
SERVICE WORK ON THE CHASSIS
13.5
Cleaning the dust boots of the fork legs
–
Mount protection cap
V00600-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Push dust boots
Info
The dust boots should remove dust and coarse dirt particles from the fork
tubes. Over time, dirt can accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
V00692-10
1
.
1
of both fork legs downward.
p. 80)
p. 80)
p. 81)
83