Table of Contents
Advertisement
17
COOLING SYSTEM
–
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the bleeder screw, and then mount
and tighten the bleeder screw immediately.
Coolant (
–
V00145-10
Completely fill the radiator with coolant. Mount the radiator cap.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
–
–
Start the engine and let it warm up.
–
Stop the engine and allow it to cool down.
–
When the engine is cool, check the coolant level in the radiator and, if necessary, add
coolant.
–
Remove the cover of compensating tank
the MAXmarking.
–
Mount the cap of the compensating tank.
V00178-12
2
.
p. 186)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
3
and top up the coolant level up to
155
Advertisement
Table of Contents
