KTM RC 390 2018 Owner's Manual page 164

19 SERVICE WORK ON THE ENGINE
–
Insert new oil filter
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil results in premature wear of the
L02271-10
engine.
–
Remove filler plug
Engine oil
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
H01080-10
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Fit the front spoiler. (
–
Check the engine oil level. (
7 .
8
and the O-ring from the clutch cover, and fill up with engine oil.
1.7 l (1.8 qt.)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 97)
p. 159)
6
.
M6 12 Nm (8.9 lbf ft)
Engine oil (SAE 15W/50) (
162
p. 187)