Table of Contents
Advertisement
16
ELECTRICAL SYSTEM
Main work
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test the open-circuit voltage and start potential
of the battery, and to test the alternator. With this device, you cannot overcharge the
battery.
Info
Never remove cover
–
Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
–
Position the negative cable and mount and tighten the screw.
M00729-11
Finishing work
–
Mount the battery cover. (
–
Mount the front rider's seat. (
–
Set the clock. (
1
.
3 months
p. 95)
p. 85)
p. 57)
132
Advertisement
Table of Contents
