Units With Four Up-Down Louvers; Selecting System Mode; Selecting Turbo Feature; Intelligent Eye Display - Lennox M0STAT120N-1 Installation And User Information

Units with Four Up-Down Louvers

NOTE: Each louver can operate
independently.
1. Press the Swing button to activate the
Up/Down Adjusting Louver function.
The Up/Down Louver icon flashes.
NOTE: The flashing Up/Down Louver icon
is not applicable to all models.
2. Press the Up/Down buttons to select
the movement of the four louvers. Each
time the buttons are pressed, the louver
is selected in a sequence as:
-01 indicates that all four louvers move at
the same time.
-0
-1
1. Use the Swing button to adjust the Up/
Down louver direction for each selected
louver.

Selecting System Mode

1. Press the FUNC. button to scroll
through available modes.
NOTE: An asterisk(*) indicates the
function is only available on
selected models. If the indoor unit
does not have a specific function,
it will not display.
-3
-2 -4
2. Select a function. The function icon
flashes on the controller's display.
3. Press the Confirm button to set that
function.

Selecting Turbo Feature

NOTE: The Turbo feature is available only
on selected models.
When in either Cool or Heat mode:
1. Press the FUNC button to activate the
turbo feature. A turbo icon displays on
the controller's display.
2. Press the FUNC button again to
deactivate the feature.

Intelligent Eye Display

NOTE: The Intelligent Eye Display
function is valid in any mode of
power-on state.
For indoor units with the Intelligent Eye
function:
1. Press the FUNC button and select the
Intelligent Eye icon.
2. Press the OK button to activate the
function. The Intelligent Eye icon
displays on the controller's screen.
When the Intelligent Eye function is
turned off, the Intelligent Eye icon goes
out.
12