Table of Contents
Advertisement
5. Operation and Configuration
10. Log function
The current shade analysis can be saved as a log file by tapping the
[Disk] button. The log file can be printed via the PrograBase X10
software or stored as a PDF file.
The DSA results greatly depend on the determination of the three reference teeth and optimum picture taking.
The designation of the reference tooth that is most similar to the tooth to be analyzed is shown as the result.
If the reference teeth are incorrectly determined or unfavourable pictures are taken, the DSA result
will also be incorrect.
Further development of the software not excluded.
5.7 IoT function
5.7.1 Description of the IoT function
The IoT function enables you to optimize your device software and
supports the fast trouble shooting in case of a technical problem.
More information about the IoT function can be found at
http://www.ivoclarvivadent.com/digitalservices
72
Advertisement
Table of Contents
