Ivoclar Vivadent 747832BU Operating Instructions Manual page 41

5.2.11 Copying programs
With the copy wizard, individual programs, program groups and program sectors can be copied. The source and target of
the copy process can be selected in the copy assistant. Programs copied to a USB flash drive can only be opened with this
furnace. PrograBase X10 offers the possibility to copy the programs to other furnaces.
Programs and program groups cannot be copied into the sector for Ivoclar Vivadent programs. This sector is
protected and reserved for original Ivoclar Vivadent programs.
1. Press the corresponding [Execute] button in the Admin
menu.
2. Select the objects to be copied.
(program sector, program group or individual program)
3. Make a selection depending on the desired copy content.
(program sector, program group, or individual program)
4. Select a target.
Confirm the selection with the green button or close the copy wizard
with the red button.
5. The copy process can be continued with the green button.
The red button is used to abort the copy process.
5. Operation and Configuration
41