Table of Contents
Advertisement
5. Operation and Configuration
Preparing USB stick programs
If this function is executed, a USB stick is prepared as program memory.
Loading an individual start screen
This function is used to load an individual start screen from a USB stick. Once an individual start screen has
been loaded, it will be shown for a few seconds when the furnace is switched on the next time.
Loading an individual melody
This function is used to load an individual melody. This melody will be played as acoustic signal as
described in Chapter 5.1.6.
Acoustic signal at the beginning of the press process
Switch the acoustic signal at the beginning of the press process on or off.
Setting options: On / Off
Timer
With this menu item, the timer can be set.
Setting options: Off / Monday to Sunday on-time and off-time
Setting up a wireless LAN (WLAN) connection
A WLAN connection can be set-up with this function. See Chapter 5.4.9 for details.
Setting options: Off / Monday to Sunday on-time and off-time
Testing push notifications
Here, push notifications for communicating with the Programat app can be tested. The Programat app
must be linked to the furnace to test push notifications. If the network has been set up correctly, a push
notification will appear on the Programat app. If no notification appears on the app, please check the
network settings.
Touch mode
Setting the sensitivity of the touch screen. Select "Special" in case of malfunctions when operating the
touch screen.
Setting option: Normal / Special
Keypad tone
Here, the keypad tone can be activated.
Setting option: On/Off
IoT function
The IoT function can be activated and deactivated here. Moreover, the connectivity status is indicated.
In addition, the time zone can be set in this section.
52
Advertisement
Table of Contents
