Phone Function - Ivoclar Vivadent Programat P710 Operating Instructions Manual

5. Operation and Configuration

5.6 Phone function

The Programat P710 features an integrated phone function. To use this function, a phone with an active SIM card must be
connected with the furnace via Bluetooth.
Press the phone key on the membrane-sealed keypad to start the phone function.
a. If the furnace is not yet connected to a mobile phone, pressing this key results in the Bluetooth settings menu being
displayed. A connection with a mobile phone can be set-up here.
b. If the furnace is already connected with a mobile phone, pressing the phone key results in the phone screen being
displayed.
1. A phone number can be directly entered on the left hand side of
the screen. The number is dialled by pressing with the green [Call]
button.
2. As soon as a connection has been established, the end-call screen
appears. The call and/or connection can be cancelled with the red
button.
3. If the mobile phone contains a contact list and the phone
supports the "Call up contact list", the contact list of the mobile
phone is shown on the right of the display.
The marked contact can be called with the green [Call] button
(see 2).
4. If several phone numbers are stored for a contact, a detailed view
appears after the green [Call] button has been pressed and the
desired phone number can be selected.
By pressing the [Call] button, the marked phone number is
called. The detailed view can be left by pressing the [Close]
button.
66