Ivoclar Vivadent 747832BU Operating Instructions Manual page 76

6. Practical Use
Step 4:
Enter the parameters.
Enter your individual parameters and create the desired firing
program (see Chapter 5.2.3 for details).
Step 5:
Load the furnace.
Now, open the furnace head using the OPEN FURNACE HEAD key
and position the firing tray with the object in the furnace.
With the Infrared Technology active, position the objects
in such a way that the infrared camera has a wide view of
the objects. Use the markings on the frame plate (see
Figure) for orientation purposes.
Step 6:
Start the program.
Activate the program by pressing the START key. The LED lights up in
green. The process is indicated in the firing curve display.
The IRT key (see Chapter 5.1.2) is used to switch to the view of the infrared camera during the closing and predrying
process. The corresponding key is pressed again to return to the firing curve display.
The furnace head opens automatically at the end of the program. When the Optical Status Display lights up in green, the
furnace is ready for the next program start.
76